Bally / Stern Pinball Rectifier Power Supply Board & Deluxe Connector Kit

$119.99

Bally / Stern Pinball Rectifier Power Supply Board and deluxe connector kit for all early electronic Bally and Stern pinball machines.

Description

Replacement Bally pinball machine power supply and rectifier boards complete with deluxe connector kit to replace all the connectors for this board. New power supply boards for all early electronic Bally and Stern pinball machines. Replaces old and non working original power rectifier boards. These heavy duty power supplies feature an all new design and construction that includes heavy duty components for long lasting reliable performance.

BPS018 – Voltage rectifier board used in most early solid state Bally and Stern pinball machines. See game listing below to see which games this supply supports.

This board is a direct replacement for the original OEM rectifier board.

The original power supply that this board replaces is Bally part numbers: AS-2518-18 & AS-2518-49

Key Benefits

– Larger, beefier bridge rectifiers for longer term operation.
– 100% Through-hole components for future serviceability.
– 100% Off the shelf commercially available parts (no custom parts).
– Test points added to check all incoming and outgoing voltages.
– All new (not 20+ year old) components and PCB.

Deluxe Connector Kit Is Included. Kit includes: 20 pin housing, 11 pin housing and 9 pin housing with key plugs, 30 Trifurcon crimp contacts. Note: J1 Connector header pin 9 is used for KISS, Future Spa and Space Invaders. All other Bally and Stern games do not use pin 9. Make sure the J1 connector housing has the key plug installed at pin 4.

Note: Please Read

Warnings: This board contains hazardous voltages. Never touch components on board with machine plugged in! This board includes parts that normally operate at high temperatures (roughly 200F). Never touch board until components have cooled off!

This circuit board requires de-soldering wires from the old board and then re-soldering the wires onto the new board! You need to take extreme care to track which-wire-goes-where. We DO NOT recommend that anyone but the most advanced repair technician try to use this board!

Note — not all machines are fused the same. Refer to your game’s manual for proper fusing.

Technical info:

Board Connection Wire Color / Gauge Transformer Lug Circuit
E1 Red 18 AWG 5 Primary AC Hot
E2 Yellow 18 AWG 1 Primary Neutral
E3 Red 20 AWG 2 Solenoid Bus Hot
E4 White/Red 20 AWG 6 Solenoid Bus Neutral
E5 Green 20 AWG 8 Display High Voltage Hot
E6 White/Green 20 AWG 10 Display High Voltage Neutral
E7 Blue 18 AWG (2 wires) 17 GI Bus Hot
E8 Black 18 AWG (2 wires) 18 GI Bus Neutral
E9 Orange 18 AWG 13 Controlled Lamp Bus Hot
E10 Green 18 AWG 14 Controlled Lamp Bus Neutral
E11 White 20 AWG 15 12V Input for 5-Volt Regulator Hot
E12 White/Black 20 AWG 16 12V Input for 5-Volt Regulator Neutral

 

Games supported by the Bally Rectifier Board: Bally: Freedom, Night Rider, Evel Knievel, Eight Ball, Power Play, Mata Hari, Strikes and Spares, Black Jack, Lost World, Six Million Dollar Man, Playboy, Voltan, Supersonic, Star Trek, Paragon, Harlem Globetrotters, Dolly Parton, KISS, Future Spa, Space Invaders, Nitro Groundshaker, Silverball Mania, Rolling Stones, Mystic, Hotdoggin’, Viking, Skateball, Frontier

Stern (A-430): Stingray, Stars, Memory Lane, Lectronamo, Wildfyre, Nugent, Dracula, Pinball, Trident, Hot Hand, magic, Meteor, Galaxy, Ali, Big Game, Seawitch, Cheetah, Quicksilver, Stargazer, Nineball, Iron Maiden, Viper, Dragonfist, Flight 2000, Free Fall, Lightning, Split Second, Catacomb, Orbitor One

Additional information

Weight 2 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

%d bloggers like this: